阅读量:1
解决方案：升级glibc到2.28版本
wget https://mirror.bjtu.edu.cn/gnu/libc/glibc-2.28.tar.xz tar -xf glibc-2.28.tar.xz -C /usr/local/ cd /usr/local/glibc-2.28/ mkdir build cd build/ ../configure --prefix=/usr/local/glibc-2.28 运行到…/configure --prefix=/usr/local/glibc-2.28时报错
报错1：
configure: error: in `/root/test/glibc-2.28/build’:
configure: error: no acceptable C compiler found in $PATH
yum install gcc -y 报错2：
These critical programs are missing or too old: make
Check the INSTALL file for required versions.
解决方案： make太过老旧，参照下文升级make
报错3：
These critical programs are missing or too old: compiler
Check the INSTALL file for required versions.
解决方案：gcc版本太旧，参照下文升级gcc
centos 升级GCC编译器
yum -y install centos-release-scl yum -y install devtoolset-8-gcc devtoolset-8-gcc-c++ devtoolset-8-binutils scl enable devtoolset-8 bash ###yum安装完,原来的gcc不覆盖，需要执行enable脚本更新环境变量 source /opt/rh/devtoolset-8/enable ###想保持覆盖，可将其写入~/.bashrc或/etc/profile echo "source /opt/rh/devtoolset-8/enable" >>/etc/profile ###查看gcc版本 gcc -v 升级make
wget http://ftp.gnu.org/gnu/make/make-4.2.tar.gz tar -xzvf make-4.2.tar.gz cd make-4.2 sudo ./configure sudo make sudo make install sudo rm -rf /usr/bin/make sudo cp ./make /usr/bin/ make -v 升级glibc-2.28
wget https://mirror.bjtu.edu.cn/gnu/libc/glibc-2.28.tar.xz tar -xf glibc-2.28.tar.xz -C /usr/local cd /usr/local/glibc-2.28/ mkdir build cd build/ yum install -y bison sudo ../configure --prefix=/usr --disable-profile --enable-add-ons --with-headers=/usr/include --with-binutils=/usr/bin make //make 运行时间较长，可能会有半小时 ###如make没有运行成功，解决error后需要先运行make clean，清除之前make的内容，才能再次执行make make clean make make install 通过strings /lib64/libc.so.6 |grep GLIBC查询是否存在glibc-2.28版本
strings /lib64/libc.so.6 |grep GLIBC ref:
centos /lib64/libc.so.6: version ‘GLIBC_2.28’ not found (required by
